ERNESTO ASCIONE

Summary

ERNESTO ASCIONE is an Inspection Quality Surveyor and Expediter with extensive national and international inspection experience for major oil and gas clients. He has inspected and expedited critical valves, piping, flanges, pressure vessels, pumps, rotating equipment, compressors, heat exchangers, welded structures, forgings, coatings, and electrical and instrumentation packages. He has led compressor builds, completed quality-documentation reviews, and supported root-cause analysis on rotor machining issues, producing corrective actions that saved hundreds of hours per build. His specialist scope includes foundry and SDSS/Inconel alloy inspection, NDT, material certification, testing, dimensional control, NCR/CAPA management, quality dossiers, and ATEX-rated AHU FAT/SAT verification. He also brings valve-testing department leadership and practical valve assembly, welding, and testing experience.

Qualifications and Training

Codes & Standards

Work Experience

Jan 2015 – Present TPI AGENCY

Inspection Quality Surveyor and Expediter

Performed national and international inspections on behalf of oil and gas companies to verify product conformity and approve products for final use.
Performed sampling and mechanical tests, incoming-material checks, and 3.1 and 3.2 verification.
Checked calibration of instrumentation and calipers.
Inspected valves, manual valves, MOVs, SDVs, piping, fittings, flanges, actuators, gears, pressure vessels, centralizers, pumps, filters, skids, rotors, fans, tubes, pig launchers and receivers.
Expedited valve components, piping, fittings, flanges, pressure vessels, pumps, filters, skids, rotors, fans, and tubes.
Executed inspections of rotating equipment for chemical and petrochemical markets, including oil-free screw compressors, magnetic-bearing turbo expanders, and DH overhung compressors.
Led compressor builds, ensured procedures were followed, and verified completion of quality documentation.
Supported root-cause analysis of rotor-machining issues, resulting in corrective actions that improved rotor delivery time and saved hundreds of hours per build.
Performed hydro testing, seal-leak consumption tests, bearing inspections, rotor and gear fixture checks, and verification of engineering CTQs.
Inspected static equipment including shell-and-tube, air-cooled, plate, printed-circuit and frame heat exchangers, drums, columns, reactors, and filters.
Witnessed hydraulic, pneumatic, functional, visual, dimensional, marking, tagging, painting, NDT, heat-treatment, and lifting-equipment activities.
Reviewed MRBs, MTCs, drawings, specifications, design practices, documentation, and final quality dossiers.
Performed vibration and noise tests on motor-fan groups and gas-turbine performance testing and analysis.
Supervised inspection and testing of welded structures and foundry activities involving SDSS and Inconel alloys.
Monitored and audited melting, refining through AOD/VOD, pouring, and cooling processes against technical specifications.
Verified heat-treatment cycles, solution annealing, aging, phase balance, and prevention of Sigma and Chi phases in SDSS.
Performed and supervised VT and PT testing and coordinated and reviewed UT and RT results.
Inspected raw and machined castings for shrinkage, porosity, hot cracking, and dimensional non-conformances against drawings.
Reviewed and approved MTRs, ITPs, and final quality dossiers; raised NCRs, investigated casting-defect root causes, and implemented CAPA.
Acted as the primary technical contact during client and third-party witnessed inspections.
Performed electrical and automation inspections involving PLC systems, panels, motors, transformers, generators, switchgear, UPS/UCP panels, cables, junction boxes, lighting, PAGA, TELECOM, CCTV, and power-plant equipment.
Inspected and tested AHU packages, including ATEX-rated units, FAT, SAT, mechanical and thermal performance, ATEX/IECEx compliance, earthing, bonding, continuity, coatings, DFT, adhesion, NDT, MTRs, MDRs, QCPs, ITPs, NCRs, punch lists, and RFS releases.
Performed instrumentation-equipment inspections covering valve actuators, manometers, thermometers, SCADA systems, sample cabinets, radar level transmitters, flow transmitters, thermocouples, signal cables, sensors, and manifolds.
Performed audits based on ISO 9001:2015 and inspections of rotating equipment, pumps, pipes, compressors, centralizers, GPR sockets, cladded piping and fittings, speed mooring systems, exchangers, and castings.
Performed professional inspection and service assignments in Singapore, Saudi Arabia, Tanajib, Lowestoft, England, and Feres, Greece.

⚠ Review: dates overlap with LCM Spa; dates overlap with LCM Spa; employer replaced on AI judgment alone — verify agency status

2018 – 2020 LCM Spa

Deputy Head of Testing Department

Worked on test benches and managed testing-department activities.
Interacted with the assembly department to evaluate valves in preparation for testing.
Organized test benches according to valve quantity, size, class, and test type to avoid interference between internal and attended tests.
Supported operators with test-bench problems and assessed whether valves could be repaired during testing rather than discarded and returned to assembly.

⚠ Review: dates overlap with AB Oil & Gas Service Srl

2013 – 2018 LCM Spa

Tester and welder

Conducted API 6A and API 6D tests according to international and customer specifications for small valves.
Performed standard hydraulic and pneumatic tests and high- and low-pressure gas tests on large valves, including flange tests.
Performed diving tests according to API 10000, FET, TAT, and cryogenic tests.
Tested trunnion, floating, top-entry, and three-way valves of various classes and sizes.
Prepared valves for testing, assembled actuators and motors, performed functional-test connections, and connected actuators to cabinets and tanks and electric motors to control units.
Welded connection pipes on drainage and valve bodies, performed welding overlays, and completed repairs and adjustments.

⚠ Review: dates overlap with AB Oil & Gas Service Srl

2007 – 2012 LCM Spa

Tester and operator

Covered assembly, testing, welding, packaging, acceptance, warehouse, and cutting functions when required or during training of new personnel.
Assembled trunnion, floating, and top-entry valves of various sizes and classes.
Performed valve testing and valve padlocking welding.
Measured and ordered packaging crates, prepared and cleaned valves, packaged valves, prepared shipping documentation, and developed loading plans.
Received and checked delivered material and controlled and coded material.
Stored material on shelves or automatic warehouses and picked details for trolley preparation.
Cut bars for component preparation, including bodies, stems, spheres, and closures, and prepared material for subcontractors.

Projects

Expediting / Monitoring	Water mist plant, saturation off fires plant	AGRITRE – Centrale Biomassa S.Agata di Puglia
Butterfly Valves for Cryogenic Ethane Storage	RIL Ethane Tank and BOP
Axial Fans	AGRITRE – Centrale Biomassa S.Agata di Puglia
Warmup bypass valve	Edison Chivasso Flex
Sanding Machine – Sanding Calibrating Line	Grayling MDP Plant Project
BV Certification	PRESALT FPSOs
ASTM A182 F55 Forged Fittings	Statoil Snorre Expansion Project
Subsea Side Entry Ball Valves, Subsea Actuated Slab Gate Valves, Subsea Double Isolation T.E. Ball Valves, Subsea Needle Valves, Subsea Rotary Gate Valve	Ærfugl / Valhall Flank North
Subsea ball valves	Wintershall NOVA
Subsea Side Entry Ball valves & Subsea Slab Gate valves	Shell Penguins
Actuated Axial Excess Flow Valve, Double Block Combined Ball Valve	Draugen LTP
Subsea Side Entry Ball Valves, Subsea Top Entry DBB Ball Valves, Subsea DBB Needle Valves; Full Qualification DBB with prototype	Hod
Axial Flow Valves	EHS

Expediting / Monitoring

Water mist plant, saturation off fires plant

AGRITRE – Centrale Biomassa S.Agata di Puglia

Butterfly Valves for Cryogenic Ethane Storage

RIL Ethane Tank and BOP

Axial Fans

AGRITRE – Centrale Biomassa S.Agata di Puglia

Warmup bypass valve

Edison Chivasso Flex

Sanding Machine – Sanding Calibrating Line

Grayling MDP Plant Project

BV Certification

PRESALT FPSOs

ASTM A182 F55 Forged Fittings

Statoil Snorre Expansion Project

Subsea Side Entry Ball Valves, Subsea Actuated Slab Gate Valves, Subsea Double Isolation T.E. Ball Valves, Subsea Needle Valves, Subsea Rotary Gate Valve

Ærfugl / Valhall Flank North

Subsea ball valves

Wintershall NOVA

Subsea Side Entry Ball valves & Subsea Slab Gate valves

Shell Penguins

Actuated Axial Excess Flow Valve, Double Block Combined Ball Valve

Draugen LTP

Subsea Side Entry Ball Valves, Subsea Top Entry DBB Ball Valves, Subsea DBB Needle Valves; Full Qualification DBB with prototype

Hod

Axial Flow Valves

EHS

Manufacturer	Equipment	Activities	Client
Viar Meccanica	Different equipment, for example Jacket TK, Flexlock collar TK, Outer Sleeve TK, Body Integral Flange TK, Outer Collar TK, Seal Ring Forging, Body H4IN40 Techlok Hub TK, Integral Flexlok Collar TK, Energizer Ring TK and other.	Final Machining, Magnetic Particle Inspection, Liquid Penetrant Inspection, Pre-Cladding & Machining, Cladding, Cladding & Machining, Visual & Dimensional Check, Hardness Survey, Heat Treatment, Final Inspection, Final.	ABSG/BHGE
ITT LAB	Specimens	Hardness, Corrosion Test, Impact test, Tensile Test.	ABS
Forgia di Bollate	NOZZLE SC (4'' - 2500# - RF), NOZZLE TW1.6 (4'' - 2500# - RF), NOZZLE I2A/I2B (6'' - 2500# - RF), NOZZLE O2A/B/C/D (10'' - 2500# - RF).	LP, MT, UT, Dimensional check, Marking.	Third part ABS
ItalbestValve	Trunnion ball valve	Idraulic test, Pneumatic test, Functional test.	ENNPI
FAS – Fabbrica Apparecchiature Antincendio SPA	Deluge valve skid, MB3 monitor with GN nozzle, MBA3 monitor with super GN nozzle.	Final fat test	ENNPI
Fittinox	ELBOW 90° LR D.2" SCH.10S BW ASTM B366 WPNICMC – NACE, ELBOW 45° LR D.2" SCH.10S BW ASTM B366 WPNICMC – NACE, BW RED TEE D.2"x1" SCH.10S/10S ASTM B366 WPNICMC – NACE, BW TEE D.2" SCH.10S ASTM B366 WPNICMC – NACE and other similar materials.	Final Inspection	GALFAR
Ripamonti Meccanica	Compressor Outer Casing	repair activties	MODEC
Euromagroup	3 Spindle head	Visual & Dimensional check	Forjas Bolivar
Cati	Continuos b.d. tank	Hydrostatic test, Visual examination, Dimensional check, PT and MT examination.	AC Boilers
Fittinox	BUTT WELD ELBOW; UNS N06625, 1” NS, Sch XS (80S), 4.55 mm Thk, 33.4 mm O, 0.179” Thk; LONG RADIUS; 90 deg; ASTM B366 WPNCMC-S; NACE MR-01-75/ISO 15156 and other similar materials.	Hardness Check, Dye Penetrant tests, Final Marking, Visual-Dimensional-Marking Check, Quantitative PMI, Visual Inspection after Pickling, TPI Release Note.	NPCC
L.P.M. Laboratory	Specimens	Tensile Test T-Base, CHARPY V-NOTCH - @ -29 °C, Product analysis, Hardness Test Throught Thickness, Metallographic examination 100x, HIC TEST SOLUTION "A" @ 96 hours, SSC TEST @ 720 hours Method "B" Solution "A".	ARCHIRODON
ELLENA	Actuators	Final inspection, Packing.	BH
COPROSIDER	Barred TEE 6”x3” WTH. 9.53/5.49 mm, Barred TEE 6” WTH.15.88 mm, Barred TEE 6” WTH. 14.27 mm, Barred TEE 6”x3” WTH. 14.27/6.35 mm.	Final Visual & Dimensional Examination, Surface Hardness Test, Check of Marking, Authorization For Despatch.	ARCHIRODON
M.E.G.A.	More similar component, for example: COUPLING S.6000 SW/NPT A/SA182 F51 1/2, COUPLING S. 6000 SW A/SA182 F51 1, 45 DEG. ELBOW S.6000 SW A/SA182 F51 1, 90 DEG. ELBOW S.6000 SW A/SA182 F51 3/4, MEGALET Sch.40S A/SA182 F51 6x16, CONC. SWAGE NIPPLE Sch.80S A/SA182 F51 PBE 1x1/2, HEXAGONAL PLUG S.6000 PE A/SA182 F51 1/2, HEX. HEAD PLUG S.3000 NPT A/SA182 F51 3/4.	Visual and Dimensional Examination, check of marking and Quantities, Inspection Release Note, - Review of Certificates and Final Documentation.	ABS
FAI	PIPE 168,3 DIA X 14,3 mm - MTL API 5L X65 PSL2, PIPE 219,1 DIA X 15,9 mm - MTL API 5L X65 PSL2, PIPE 114,3 DIA X 13,49 mm - MTL ASTM A333 GR. 6, PIPE 60,3 DIA X 8,74mm- MTL ASTM A333 GR. 6, PIPE 33.4 DIA X 6,35 mm- MTL ASTM A333 GR. 6, PIPE 88,9 DIA X 3,05mm - ASTM A 312 Tp316L.	Visual Inspection, Dimensional Check, Sampling Marking & Traceability.	ARCHIRODON
TMC	Transformer	Routine Test	IQI GROUP
VIP	Valves	Painting check, Marking check, Name plate check.	MODEC
VOGT	Valves	Hydraulic Test, Gas Test, Torque Test, Cavity Relief Test, Dimensional check.	MODEC
BUTI	Valves	PR2 Test	MODEC
EPC FOR DALMA GAS DEVELOPMENT PROJECT	Italy
DALMA GAS DEVELOPMENT PROJECT PACKAGE B (ONSHORE FACILITIES)	Italy
EPC FOR BAB FACILITIES UPGRADE PROJECT	Italy
2035 – Umm-Shaif LTDP-1	Italy
BU HASA PLANT FLARE UPGRADE PROJECT	Italy
Ruwais Fire Water Network Upgrade (NGL & SGP)	Italy
CALL-OUT WORKS CONTRACT FOR ASR GAS TIE-INS IN BAB	MELESI SIDERTEST	ROBSTONE	Flanges	Dimensional Check, Mechanical Testing, Chemical Analysis, Corrosion Test, NDE
TIE-IN OF 17 WELLS BY EXISTING BAB INTEGRATED FACILITIES PROJECT	OFFICINA NICOLA GALPERTI	ROBSTONE	Flanges	Dimensional Check, Mechanical Testing, NDE
BAB INTEGRATED FACILITIES PROJECT	MELESI SIDERTEST	ROBSTONE	Flanges	Dimensional Check, Mechanical Testing, Chemical Analysis, Corrosion Test
EPC FOR BAB 485 MBD SUSTAINABLE FACILITIES PROJECT	OFFICINA NICOLA GALPERTI	ARCHIRODON	Flanges	Dimensional Check, Mechanical Testing, PIM, NDE
EPC FOR BAB 485 MBD SUSTAINABLE FACILITIES PROJECT	MELESI SIDERTEST	ARCHIRODON	Flanges	Dimensional Check, Mechanical Testing, Chemical Analysis, Corrosion Test, NDE
FLOWSERVE WORTHINGTON	Desio (MB)	Italy
PERONI POMPE	Corsico (MI)	Italy
INOX FUCINE	Montanaso Lombardo (LO)	Italy
NUGO ROMANO	Piedimulera (VB)	Italy
POS ITALIANA	Brandizzo (TO)	Italy
OFFICINE A. MELESI	Cortenova (LC)	Italy
BREMBANA E ROLLE	Bergamo	Italy
CIESSE SRL	Bergamo	Italy
DBM	Artegna (UD)	Italy
SEKO	Milano (MI)	Italy
TURBINE BLADES	Castelletto Ticino (NO)	Italy
BOLDROCCHI	Biassono (MB)	Italy
DAB PUMPS	Padova (PD)	Italy
FINDER POMPE	Merate (LC)	Italy
FLOWSERVE WORTHINGTON	Desio (MB)	Italy
HYDROSERVICE	Gallarate (VA)	Italy
NORMICON	Gessate (MI)	Italy
PERONI POMPE	Corsico (MI)	Italy
SEKO	Milano (MI)	Italy
TURBINE BLADES	Castelletto Ticino (NO)	Italy
EXAKTA	Milano (MI)	Italy
PERONI Pompe	Milano (MI)	Italy
TRILLIUM PUMPS	Milano (MI)	Italy
OMG	Gallarate (VA)	Italy
AFFETTI PUMPS s.r.l.	Castellanza (VA)	Italy
NEXTURBO Srl	Varese (VA)	Italy
FORONI	Gorla Minore (VA)	Italy
GALPERTI	Cortenova (LC)	Italy
INOX FUCINE	Montanaso Lombardo (LO)	Italy
NUOVA GIUNGAS	Formigine (MO)	Italy
OFFICINE A. MELESI	Cortenova (LC)	Italy
RINGMILL	Nuova Olonio di Dubino (SO)	Italy
TENARIS	Dalmine (BG)	Italy
CHAMPION AirTech	Lonate Ceppino (VA)	Italy
AIRCOMP	Caprino Veronese (VR)	Italy
CECCATO ARIA COMPRESSA	Montecchio Maggiore	Italy
ABAC Air compressor	Robassomero	Italy
ROTAIR spa	Caraglio	Italy
RIAC srl	Milano	Italy
SINERGIA	Albino (BG)	Italy
NUGO ROMANO	Piedimulera (VB)	Italy
POS ITALIANA	Brandizzo (TO)	Italy
MAXWELL OIL TOOLS	Ravenna	Italy
SCAME	Bergamo	Italy
PALAZZOLI	Brescia	Italy
IMP Group	Rovigo	Italy
INOXTECH	Ledinara (RO)	Italy
TECTUBI RACCORDI	Podenzano (PC)	Italy
SIDERTEST	Castel San Giovanni (PC)	Italy
VIAR SPA	Besnate (VA)	Italy
TENARIS	Dalmine (BG)	Italy
MODEC	Milano	Italy
REMAZEL	Bergamo	Italy
NOV	Milano	Italy
COES	Bergamo	Italy
FBM HUDSON	Milano	Italy
BREMBANA E ROLLE	Bergamo	Italy
CIESSE SRL	Bergamo	Italy
DBM	Artegna (UD)	Italy
LUCCHINI RS	Lovere (BG)	Italy
TERENZIANI	S. Polo di Torrile (PR)	Italy

Manufacturer

Equipment

Activities

Client

Viar Meccanica

Different equipment, for example Jacket TK, Flexlock collar TK, Outer Sleeve TK, Body Integral Flange TK, Outer Collar TK, Seal Ring Forging, Body H4IN40 Techlok Hub TK, Integral Flexlok Collar TK, Energizer Ring TK and other.

Final Machining, Magnetic Particle Inspection, Liquid Penetrant Inspection, Pre-Cladding & Machining, Cladding, Cladding & Machining, Visual & Dimensional Check, Hardness Survey, Heat Treatment, Final Inspection, Final.

ABSG/BHGE

ITT LAB

Specimens

Hardness, Corrosion Test, Impact test, Tensile Test.

ABS

Forgia di Bollate

NOZZLE SC (4'' - 2500# - RF), NOZZLE TW1.6 (4'' - 2500# - RF), NOZZLE I2A/I2B (6'' - 2500# - RF), NOZZLE O2A/B/C/D (10'' - 2500# - RF).

LP, MT, UT, Dimensional check, Marking.

Third part ABS

ItalbestValve

Trunnion ball valve

Idraulic test, Pneumatic test, Functional test.

ENNPI

FAS – Fabbrica Apparecchiature Antincendio SPA

Deluge valve skid, MB3 monitor with GN nozzle, MBA3 monitor with super GN nozzle.

Final fat test

ENNPI

Fittinox

ELBOW 90° LR D.2" SCH.10S BW ASTM B366 WPNICMC – NACE, ELBOW 45° LR D.2" SCH.10S BW ASTM B366 WPNICMC – NACE, BW RED TEE D.2"x1" SCH.10S/10S ASTM B366 WPNICMC – NACE, BW TEE D.2" SCH.10S ASTM B366 WPNICMC – NACE and other similar materials.

Final Inspection

GALFAR

Ripamonti Meccanica

Compressor Outer Casing

repair activties

MODEC

Euromagroup

3 Spindle head

Visual & Dimensional check

Forjas Bolivar

Cati

Continuos b.d. tank

Hydrostatic test, Visual examination, Dimensional check, PT and MT examination.

AC Boilers

Fittinox

BUTT WELD ELBOW; UNS N06625, 1” NS, Sch XS (80S), 4.55 mm Thk, 33.4 mm O, 0.179” Thk; LONG RADIUS; 90 deg; ASTM B366 WPNCMC-S; NACE MR-01-75/ISO 15156 and other similar materials.

Hardness Check, Dye Penetrant tests, Final Marking, Visual-Dimensional-Marking Check, Quantitative PMI, Visual Inspection after Pickling, TPI Release Note.

NPCC

L.P.M. Laboratory

Specimens

Tensile Test T-Base, CHARPY V-NOTCH - @ -29 °C, Product analysis, Hardness Test Throught Thickness, Metallographic examination 100x, HIC TEST SOLUTION "A" @ 96 hours, SSC TEST @ 720 hours Method "B" Solution "A".

ARCHIRODON

ELLENA

Actuators

Final inspection, Packing.

COPROSIDER

Barred TEE 6”x3” WTH. 9.53/5.49 mm, Barred TEE 6” WTH.15.88 mm, Barred TEE 6” WTH. 14.27 mm, Barred TEE 6”x3” WTH. 14.27/6.35 mm.

Final Visual & Dimensional Examination, Surface Hardness Test, Check of Marking, Authorization For Despatch.

ARCHIRODON

M.E.G.A.

More similar component, for example: COUPLING S.6000 SW/NPT A/SA182 F51 1/2, COUPLING S. 6000 SW A/SA182 F51 1, 45 DEG. ELBOW S.6000 SW A/SA182 F51 1, 90 DEG. ELBOW S.6000 SW A/SA182 F51 3/4, MEGALET Sch.40S A/SA182 F51 6x16, CONC. SWAGE NIPPLE Sch.80S A/SA182 F51 PBE 1x1/2, HEXAGONAL PLUG S.6000 PE A/SA182 F51 1/2, HEX. HEAD PLUG S.3000 NPT A/SA182 F51 3/4.

Visual and Dimensional Examination, check of marking and Quantities, Inspection Release Note, - Review of Certificates and Final Documentation.

ABS

FAI

PIPE 168,3 DIA X 14,3 mm - MTL API 5L X65 PSL2, PIPE 219,1 DIA X 15,9 mm - MTL API 5L X65 PSL2, PIPE 114,3 DIA X 13,49 mm - MTL ASTM A333 GR. 6, PIPE 60,3 DIA X 8,74mm- MTL ASTM A333 GR. 6, PIPE 33.4 DIA X 6,35 mm- MTL ASTM A333 GR. 6, PIPE 88,9 DIA X 3,05mm - ASTM A 312 Tp316L.

Visual Inspection, Dimensional Check, Sampling Marking & Traceability.

ARCHIRODON

TMC

Transformer

Routine Test

IQI GROUP

VIP

Valves

Painting check, Marking check, Name plate check.

MODEC

VOGT

Valves

Hydraulic Test, Gas Test, Torque Test, Cavity Relief Test, Dimensional check.

MODEC

BUTI

Valves

PR2 Test

MODEC

EPC FOR DALMA GAS DEVELOPMENT PROJECT

Italy

DALMA GAS DEVELOPMENT PROJECT PACKAGE B (ONSHORE FACILITIES)

Italy

EPC FOR BAB FACILITIES UPGRADE PROJECT

Italy

2035 – Umm-Shaif LTDP-1

Italy

BU HASA PLANT FLARE UPGRADE PROJECT

Italy

Ruwais Fire Water Network Upgrade (NGL & SGP)

Italy

CALL-OUT WORKS CONTRACT FOR ASR GAS TIE-INS IN BAB

MELESI SIDERTEST

ROBSTONE

Flanges

Dimensional Check, Mechanical Testing, Chemical Analysis, Corrosion Test, NDE

TIE-IN OF 17 WELLS BY EXISTING BAB INTEGRATED FACILITIES PROJECT

OFFICINA NICOLA GALPERTI

ROBSTONE

Flanges

Dimensional Check, Mechanical Testing, NDE

BAB INTEGRATED FACILITIES PROJECT

MELESI SIDERTEST

ROBSTONE

Flanges

Dimensional Check, Mechanical Testing, Chemical Analysis, Corrosion Test

EPC FOR BAB 485 MBD SUSTAINABLE FACILITIES PROJECT

OFFICINA NICOLA GALPERTI

ARCHIRODON

Flanges

Dimensional Check, Mechanical Testing, PIM, NDE

EPC FOR BAB 485 MBD SUSTAINABLE FACILITIES PROJECT

MELESI SIDERTEST

ARCHIRODON

Flanges

Dimensional Check, Mechanical Testing, Chemical Analysis, Corrosion Test, NDE

FLOWSERVE WORTHINGTON

Desio (MB)

Italy

PERONI POMPE

Corsico (MI)

Italy

INOX FUCINE

Montanaso Lombardo (LO)

Italy

NUGO ROMANO

Piedimulera (VB)

Italy

POS ITALIANA

Brandizzo (TO)

Italy

OFFICINE A. MELESI

Cortenova (LC)

Italy

BREMBANA E ROLLE

Bergamo

Italy

CIESSE SRL

Bergamo

Italy

DBM

Artegna (UD)

Italy

SEKO

Milano (MI)

Italy

TURBINE BLADES

Castelletto Ticino (NO)

Italy

BOLDROCCHI

Biassono (MB)

Italy

DAB PUMPS

Padova (PD)

Italy

FINDER POMPE

Merate (LC)

Italy

FLOWSERVE WORTHINGTON

Desio (MB)

Italy

HYDROSERVICE

Gallarate (VA)

Italy

NORMICON

Gessate (MI)

Italy

PERONI POMPE

Corsico (MI)

Italy

SEKO

Milano (MI)

Italy

TURBINE BLADES

Castelletto Ticino (NO)

Italy

EXAKTA

Milano (MI)

Italy

PERONI Pompe

Milano (MI)

Italy

TRILLIUM PUMPS

Milano (MI)

Italy

OMG

Gallarate (VA)

Italy

AFFETTI PUMPS s.r.l.

Castellanza (VA)

Italy

NEXTURBO Srl

Varese (VA)

Italy

FORONI

Gorla Minore (VA)

Italy

GALPERTI

Cortenova (LC)

Italy

INOX FUCINE

Montanaso Lombardo (LO)

Italy

NUOVA GIUNGAS

Formigine (MO)

Italy

OFFICINE A. MELESI

Cortenova (LC)

Italy

RINGMILL

Nuova Olonio di Dubino (SO)

Italy

TENARIS

Dalmine (BG)

Italy

CHAMPION AirTech

Lonate Ceppino (VA)

Italy

AIRCOMP

Caprino Veronese (VR)

Italy

CECCATO ARIA COMPRESSA

Montecchio Maggiore

Italy

ABAC Air compressor

Robassomero

Italy

ROTAIR spa

Caraglio

Italy

RIAC srl

Milano

Italy

SINERGIA

Albino (BG)

Italy

NUGO ROMANO

Piedimulera (VB)

Italy

POS ITALIANA

Brandizzo (TO)

Italy

MAXWELL OIL TOOLS

Ravenna

Italy

SCAME

Bergamo

Italy

PALAZZOLI

Brescia

Italy

IMP Group

Rovigo

Italy

INOXTECH

Ledinara (RO)

Italy

TECTUBI RACCORDI

Podenzano (PC)

Italy

SIDERTEST

Castel San Giovanni (PC)

Italy

VIAR SPA

Besnate (VA)

Italy

TENARIS

Dalmine (BG)

Italy

MODEC

Milano

Italy

REMAZEL

Bergamo

Italy

NOV

Milano

Italy

COES

Bergamo

Italy

FBM HUDSON

Milano

Italy

BREMBANA E ROLLE

Bergamo

Italy

CIESSE SRL

Bergamo

Italy

DBM

Artegna (UD)

Italy

LUCCHINI RS

Lovere (BG)

Italy

TERENZIANI

S. Polo di Torrile (PR)

Italy

Skills

Inspection Quality Surveying

Third-Party Inspection

Expediting

Mechanical Equipment Inspection

Valve Inspection and Testing

Rotating Equipment Inspection

Compressor Inspection

Foundry and Casting Inspection

Welding Inspection

NDT Coordination and Review

Electrical Equipment Inspection

Instrumentation Equipment Inspection

AHU FAT and SAT Inspection

Coating and Painting Inspection

Material Certification and Traceability

Quality Documentation Review

Non-Conformance Management

Root Cause Analysis

Testing Department Supervision

Summary

Qualifications and Training

Codes & Standards

Work Experience

Projects

Languages

Skills

Commodities