⚠️ This extraction is old — generated 2026-08-27 10:27 under pipeline 2026-08-24-cv-extraction-v9; the current pipeline is 2026-08-28-cv-extraction-v10. Regenerate this CV before re-testing an issue against it.
Summary
Vimlesh Kumar Mishra is an Inspection Engineer with 21+ years of experience spanning QA/QC, pipe manufacturing, coating plants, coil and plate mills, pressure vessels, piping, equipment erection and third-party inspection. He brings 12 years of QA/QC experience in pipe plant organizations and more than 9 years of third-party inspection experience across oil and gas, petrochemical and infrastructure projects. His specialist scope covers steel pipes and tubes, welding fabrication, static and pressure-containing equipment, heat exchangers, storage tanks, columns and reactors. He is experienced in NDE, welding procedure and welder qualification, coating inspection, material verification, laboratory testing and quality documentation. He has also coordinated directly with clients and managed expediting, contractors, TPI activities and project quality requirements.
extraction may be condensed — fewer details than the source suggests; review or regenerate
summary may omit high-priority source evidence: Has 12 years of QA/QC experience in pipe plant organizations and 9+ years of third-party inspection experience.
Education
- Diploma in Mechanical Engineering
Qualifications and Training
- ASNT Level II – Eddy Current Testing
- Welding Inspector Technology (WT)
- ASNT UT Level II
- ASNT VT Level II
- ASNT MT Level II
- ASNT RT Level II
- ASNT PT Level II
Previous Fulkrum Work Experience
- SS Pipes & Tube Inspection for Oil SERV involving Venus Pipes and Tubes Limited, including RMTC, raw material testing, heat treatment, mechanical and chemical test review, hydrostatic testing and dimensional inspection.
Codes & Standards
- ASME Section IX
- AWS
- B31.3
- B31.1
- B31.2
- B31.4
- B31.8
- API 1104
- API 650
- API 510
- API 570
- ISO 15590-1
- MSS-SP-75
- ASME B16.49
- API 5L
- ASME Section V-2015
- ISO 10893-9-2011
- EN BS 5996
- EN 10246-15
- ASTM A435
- ASTM A578
- SEL072
- ISO 10893-11-2011
- ASTM E273
- ASTM E164-2013
- ASTM E587-10
- ISO 10893-8-2011
- ASTM E213-2014
- ASTM E94-2010
- ISO 19232-2013
- ASTM E1815-08
- ISO 11699-2008
- ASTM SE-1079-2010
- ISO 10893-6:2011
- ISO 10893-5-2011
- ASTM E-709:2014
- ASME Section VIII (Division I and Division II)
- ASME Section II
- API 571
- API 574
- API 576
- API 577
- API 578
- API 653
- ASME B31.1
- ASME B31.3
- API 5L
- API 1104
- ASME PCC-2
- AWS D1.1
- IS 7215
- ASME B16.5
- ASME Section VIII Division I
- PED 2014/68/EU
- EN 287-1
- ISO 9606-1
- EN 15614
- CFR49 (DOT4L)
- ISO/IEC 17025
- ISO 21809-5
- ASTM A370
- ASTM A751
- DIN
- BGS
- ISO 9001:2000
- DEP
Work Experience
Mar 2018 – Oct 2018
Loyal Equipments Limited
Quality Sr. Engineer
- Reviewed material test certificates, material identification, heat-number transfer and traceability.
- Monitored manufacturing activities against drawings, codes, tolerances and approved quality control plans.
- Performed visual and dimensional fit-up inspection, including root gap, root face, bevel angle, joint cleanliness and preheating requirements.
- Monitored welding parameters, interpass temperature, electrode weaving, electrode backing and filler-wire control against WPS.
- Inspected SMAW, GTAW, FCAW and SAW welds for undercut, reinforcement, porosity, underfill and lack of fusion.
- Witnessed PMI, hardness testing, thickness measurement and other stage-wise tests.
- Monitored PWHT heating rate, soaking time and cooling rate and reviewed PWHT charts.
- Witnessed final dimensional and visual inspections and prepared inspection reports for client approval.
- Verified UT, RT, MPT and LPT results before hydro testing.
- Witnessed hydrostatic, pneumatic and vacuum testing.
- Performed stage-wise inspection of fit-up, dimensions, visual condition, assembly and alignment.
- Performed final inspection after hydro testing, including internal cleaning, flange-face cleaning and nameplate fixing.
- Reviewed manufacturing data books, dossiers, as-built drawings and final documentation.
- Inspected incoming plates, pipes, fittings, flanges, valves and compressor parts.
- Coordinated with third-party inspectors including TUV, Lloyd’s, BVIS, SGS and Intertek.
- Communicated corrective action for non-conformance reports.
- Reviewed vendor quality plans, ITPs, drawings and client requirements.
- Prepared stage-wise inspection documents and U-stamp documentation.
- Coordinated inspection calls with TPI agencies and test laboratories.
- Coordinated instrument calibration with the laboratory.
- Performed external vendor inspection of tube sheets, baffles, tubes and tube bundles.
Aug 2017 – Mar 2018
Supertech Infraprojects Pvt. Ltd
Quality Engineer
- Performed pre-assembly and alignment activities for boiler structures, pressure parts and piping.
- Reviewed isometric and GA drawings.
- Inspected fit-up, welding, material identification, NDT and heat-treatment activities and prepared associated reports.
- Prepared punch lists and line history sheets.
- Witnessed hydro testing of boiler pressure parts and piping systems.
- Attended weekly and monthly meetings with the client.
- Operated PMI machine and D. Meter for material and thickness verification.
- Prepared welding schedules for pressure-part and piping joints in accordance with IBR and ASME requirements.
- Ensured work was performed safely and according to company quality and health and safety procedures.
Sep 2007 – Jul 2017
Welspun Corp Limited
QA/QC
- Prepared and implemented QA/QC procedures and Quality Assurance and Inspection Test Plans against client technical specifications.
- Monitored shift-wise, stage-wise, size-wise and line-wise production and consumption reports.
- Documented and implemented ISO 9001:2000 requirements and certification in accordance with the Quality System Manual and procedures.
- Liaised with TPI, clients and consultants on quality systems, procedures and project coordination.
- Applied required specifications and their applications.
- Planned and coordinated inspection and testing equipment, materials and manpower for projects.
- Handled customer complaints relating to quality matters.
Oct 2005 – Aug 2007
Man Industries India Limited
QA/QC
- Prepared and implemented QA/QC procedures and Quality Assurance and Inspection Test Plans against client technical specifications.
- Monitored shift-wise, stage-wise, size-wise and line-wise production and consumption reports.
- Documented and implemented ISO 9001:2000 requirements and certification in accordance with the Quality System Manual and procedures.
- Liaised with TPI, clients and consultants on quality systems, procedures and project coordination.
- Applied required specifications and their applications.
- Planned and coordinated inspection and testing equipment, materials and manpower for projects.
- Handled customer complaints relating to quality matters.
Projects
Ruwais LNG Project, Liquid Nitrogen Storage and Vaporisation
Vendor: TJN (JV) - Technip Energies
Client: ADNOC Gas Operations and Marketing LLC
Ruwais LNG Project, Liquid Nitrogen Storage and Vaporisation
Vendor: TJN (JV) - Technip Energies
Product: LNG
Client: Abu Dhabi National Oil Company (ADNOC)
HAIL & GHASHA DEVELOPMENT PROJECT PACKAGE 2 - ONSHORE FACILITIES
Vendor: M/s. CUNADO MIDDLE EAST FOR PIPES AND VALVES, L.L.C. (Tecnimont)
Product: Pipes and valves
Location: Abu Dhabi
Client: Abu Dhabi National Oil Company (ADNOC) P.J.S.C
HAIL & GHASHA DEVELOPMENT PROJECT PACKAGE 1–OFFSHORE FACILITIES
Vendor: NPCC-SAIPEM JOINT VENTURE
JSIW Infrastructure Pvt. Ltd.
IOCL Dagoba / Guwahati Refinery
IOCL O&M City Gas Distribution Pipe Line
Cryogenic liquid storage terminal, Jetty Pipeline Kandla
Location: Kandla
Client: Public Authority of Water (PAW) of Sultanate of Oman
Public Authority of Water (PAW) of Sultanate of Oman Project
Location: Oman
Zubair Oil Field Development Project
Client: IOCL
Laying of 42” OD Submarine pipeline and installation of no. SPM system in Gulf of Kutch off Vadinar Gujarat
Vendor: Welspun
Product: 42-inch submarine pipeline and SPM system
Location: Gulf of Kutch, Vadinar, Gujarat
Trans Canada Pipe Line Project (TCPL)
Location: Canada
IOCL Paradeep to Haldia Pipe Line Project
Indraprastha Gas Limited Project
GAIL PL.0112 SAPL-SEC-III Pipe Line Project
GAIL PL.0103, PL.0104 Ahmednagar & Aurangabad Gas Pipe Line Project
EPCM SERVICES COT AT PARADIP, PNCPL & NSPPL (NRL Plate Inspection)
Product: Plate
Location: Paradip
KALAMANAGA- Paradip Iron Ore Slurry Pipeline Project
Product: Iron ore slurry pipeline
Location: Paradip
Renew-Envision 3.3MW_156RD_140HH for RTC W2 Projects
Location: Kurudhagi, Karnataka
Mundra Solar Energy Project
Location: Mundra
AUG 2017 – MAR 2018
Client: National Fertilizer Ltd; Thermax Ltd
1 X 20 MWGTG-HRSG Project, Nangal, Punjab
Vendor: Supertech Infraprojects Pvt. Ltd
Product: Boiler structure, boiler pressure parts and piping
Position: Quality Engineer
Location: Nangal, Punjab
- Performed pre-assembly and alignment activities for boiler structures and pressure parts.
- Performed pre-assembly and alignment activities for piping.
- Reviewed isometric and GA drawings.
- Inspected fit-up and welding and prepared fit-up and weld visual reports.
- Inspected material identification against applicable codes and specifications.
- Inspected NDT activities and reviewed NDT reports.
- Inspected heat-treatment requirements and reviewed heat-treatment reports.
- Prepared punch lists and line history sheets.
- Witnessed hydro testing of boiler pressure parts and piping systems.
- Attended weekly and monthly meetings with the client.
- Operated PMI machine and D. Meter for material and thickness verification.
- Prepared welding schedules for pressure-part and piping joints according to IBR and ASME requirements.
MAR 2018 – OCT 2018
Quality inspection at Loyal Equipments Limited
Vendor: Loyal Equipments Limited
Product: Pressure vessels, heat exchangers, piping and fabricated equipment
Position: Quality Sr. Engineer
Location: Zak, Gandhinagar
- Reviewed and verified material test certificates and material traceability.
- Monitored manufacturing activities for compliance with drawings, codes, tolerances and approved quality control plans.
- Performed visual and dimensional fit-up inspection of weld seams.
- Monitored welding parameters, interpass temperature, electrode control and filler wire in accordance with WPS.
- Inspected SMAW, GTAW, FCAW and SAW welding for surface defects.
- Witnessed PMI, hardness testing and thickness measurement.
- Monitored PWHT cycles and reviewed PWHT charts.
- Witnessed final dimensional and visual inspections and prepared inspection reports.
- Verified UT, RT, MPT and LPT results before hydro testing.
- Witnessed hydrostatic, pneumatic and vacuum testing.
- Performed stage-wise inspection of fit-up, dimensions, visual condition, assembly and alignment.
- Performed final inspection after hydro testing, including internal cleaning, flange-face cleaning and nameplate fixing.
- Reviewed final MRB/manufacturing data books and dossiers.
- Inspected incoming plates, pipes, fittings, flanges, valves and compressor parts.
- Reviewed as-built drawings and obtained AI/TPI signatures.
- Coordinated with third-party inspectors including TUV, Lloyd’s, BVIS, SGS and Intertek.
- Coordinated corrective action for non-conformance reports.
- Reviewed ITPs, vendor quality plans, drawings and client requirements.
- Prepared stage-wise inspection documents, final documentation and U-stamp records.
2025 – JAN 2026
Client: High View Power
AIR ENERGY STORAGE CRYOGENIC VESSEL
Vendor: DNV third-party inspection agency
Product: Cryogenic vessels, 5800 DIA x 41 m long, SA312 TP 304, 5 units
Position: Inspection Engineer Surveyor
- Inspected material identification and in-process activities.
- Inspected fabrication in accordance with drawings.
- Performed fit-up, final, visual and dimensional inspection.
- Witnessed hydrostatic and pneumatic testing, NDT, welding and painting.
2025
Client: CPC Taiwan
36-inch OD, 228 km LSAW steel pipe procurement project
Vendor: Man Industries (India) Ltd., Anjar
Product: DNV SAWL F, D coated and bare steel pipe
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected bare pipe and coating production for 36-inch OD LSAW pipe.
2025
Client: NPCC
Maximize Ethane Recovery & Monetization (MERAM)-EPC
Vendor: Ratnamani Metals and Tubes Ltd., India
Product: 36-inch, 42-inch and 48-inch OD LSAW pipe, ASTM A672 Gr. C60 CL22 NACE
Position: Inspection Engineer Surveyor
Location: India
- Inspected LSAW pipe manufacturing and applicable inspection activities.
2025
Client: ESTIDAMA Sales Gas Pipeline Network Enhancement Project, Packages 4 and 7
Shuwaib Sajaa Pipeline and Margham Pipeline
Vendor: Jindal SAW Ltd.
Product: LSAW bare pipe, internal and external coating and hot induction bends
Position: Inspection Engineer Surveyor
Location: Mundra, Gujarat
- Inspected 230 km of LSAW bare pipe in multiple sizes and wall thicknesses.
- Inspected internal and external coating and hot induction bends.
- Performed inspection against API 5L Grade L450MS (X65MS) PSL-2 requirements.
2024 – 2025
Client: ADNOC
ADNOC EPC Works for Wave C3A Petrojet Project
Vendor: Jindal SAW Ltd.
Product: 142 km of LSAW bare pipe, API 5L L450MS/X65MS and L415MS/X65MS PSL 2
Position: Inspection Engineer Surveyor
Location: Mundra, Gujarat
- Inspected LSAW bare pipe in sizes from 18 to 40 inches OD.
- Inspected material identification, in-process and final inspection, NDT, welding and painting.
2024
Client: ADNOC Offshore / NPCC
ADNOC Offshore Project
Vendor: Jindal SAW Ltd.
Product: 160 km of Grade X70M PSL-2 LSAW bare pipe with 3LPE coating
Position: Inspection Engineer Surveyor
Location: Mundra, Gujarat
- Inspected bare pipe production and 3LPE coating.
2023 – 2024
Client: Qatar Gas Pipeline Project
D7519-NFPS Project-Offshore Comp1
Vendor: Welspun Corp Ltd.
Product: 131 hot induction bends, 822.34 OD x 26.97 mm WT, 5D radius
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected hot induction bend manufacturing and testing.
2023
Client: Adani
Adani Khavda Solar Project
Vendor: Jash Energy Pvt. Ltd.; Adani
Product: Solar project equipment and galvanized torque tube, tube connector upper and tube connector bottom structures/parts
Position: Inspection Engineer Surveyor
Location: Khavda
- Inspected solar project equipment manufacturing.
- Inspected galvanizing, including coating mass, uniformity and adhesion testing.
2023
Client: China Petroleum Pipeline Engineering Company
China Petroleum Pipeline Project
Vendor: Man Industries India Ltd., Anjar
Product: 180 km LSAW bare pipe and 3LPE coating, Grade X65M PSL-2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected LSAW bare pipe and 3LPE coating.
2022 – 2023
Client: Rushmore Enterprises Inc
Rush Pipeline Project
Vendor: Surya Roshni Ltd., Anjar
Product: 98 km HFW bare pipe and 3LPE coating, Grade X65 PSL-2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected ERW/HFW pipe and 3LPE coating.
2022
Client: MRPL/CDU VDU Project
Suction Volume Bottle and Discharge Volume Bottles
Vendor: Praj Industries Pvt. Ltd.
Product: Small to medium vessels and heat exchangers, LTCS, CS and SS
Position: Inspection Engineer Surveyor
Location: Gandhidham, Gujarat
- Performed all-stage inspection, material identification, visual and dimensional inspection, hydrostatic and pneumatic testing, NDT, welding and painting inspection.
2022
Client: KPCL Refinery
KPCL Refinery Project
Vendor: Ishan Equipment’s Pvt. Ltd.
Product: Small to medium vessels and heat exchangers, LTCS, CS and SS
Position: Inspection Engineer Surveyor
- Performed all-stage inspection, material identification, visual and dimensional inspection, hydrostatic and pneumatic testing, NDT, welding and painting inspection.
2022
Client: IOCL Dagoba / Guwahati Refinery
IOCL Dagoba / Guwahati Refinery Project
Vendor: Anup Engineering
Product: Large vertical columns, CS, shell SA 516 Gr. 60 and Gr. 70
Position: Inspection Engineer Surveyor
- Inspected large vertical columns up to 2.5 m diameter, 32 mm thickness and 60 m length.
- Performed material identification, in-process, final, NDT, welding and painting inspection.
2022
Client: GAIL and IOCL
Cryogenic Liquid Storage Terminal Jetty Pipeline Project
Vendor: AEGIS Logistic Ltd., Kandla
Product: 15 km line pipe, 16-inch, 12-inch and 8-inch OD, Grade X70M and X65M PSL-2
Position: Inspection Engineer Surveyor
Location: Kandla, Gujarat
- Inspected line pipe work, WPS, fit-up, welding, trenching, lowering, hydro testing, NDT and documentation.
2021 – 2022
Client: Barossa Project
Barossa Project
Vendor: Welspun Corp Ltd., Anjar
Product: 220 km LSAW bare pipe, Grade 450 SFD and 450 SFDU
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected LSAW bare pipe production and testing.
2021
Client: Baker Hughes
Baker Hughes Project
Vendor: Praj Industries
Product: Suction volume bottle, discharge volume bottle and recovery tank
Position: Inspection Engineer Surveyor
- Performed all-stage inspection, material identification, final, visual and dimensional inspection, hydrostatic and pneumatic testing, NDT, welding, heat treatment and painting inspection.
2021
Client: IGL
IGL Rajasthan Project
Vendor: Surya Roshni Ltd., Anjar
Product: 190 km HFW bare pipe and 3LPE coating, Grade X56 PSL-2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected ERW/HFW bare pipe and 3LPE coating.
2019 – 2020
Client: IGL
IGL Rajasthan Project
Vendor: Welspun Corp Ltd., Anjar
Product: 190 km HFW bare pipe and 3LPE coating, Grade X56 PSL-2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected ERW/HFW bare pipe and 3LPE coating.
2019
Client: IOCL
IOCL Pipeline Project
Vendor: Man Industries India Ltd., Anjar
Product: 265 km HSAW and LSAW bare pipe and 3LPE coating, Grade X70M PSL-2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected HSAW and LSAW bare pipe and 3LPE coating.
2018 – 2019
Client: ENI East Spingarn Me Rakes Development Project
ENI East Spingarn Me Rakes Development Project
Vendor: Welspun Corp Ltd., Dahaj
Product: 300 km LSAW bare pipe, ISO 3183 L450MO
Position: Inspection Engineer Surveyor
Location: Dahaj, Gujarat
- Inspected LSAW bare pipe manufacturing and testing.
2019
Client: GAIL, KKBMPL Project
GAIL (PHII) KKBMPL Project
Vendor: Man Industries India Ltd., Anjar
Product: 170 km HSAW and LSAW bare pipe and 3LPE coating, Grade X65M PSL-2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected HSAW and LSAW bare pipe and 3LPE coating.
2019
Client: Saipem Project
Saipem Project
Vendor: Jindal SAW Ltd., Mundra
Product: 180 km LSAW bare pipe and 3LPE coating, Grade X70M PSL-2
Position: Inspection Engineer Surveyor
Location: Mundra, Gujarat
- Inspected LSAW bare pipe and 3LPE coating.
2018
Client: IOCL
IOCL Paradeep to Haldia Pipeline Project
Vendor: Jindal SAW Ltd., Mundra
Product: 260 km LSAW bare pipe and 3LPE coating, Grade X70M PSL-2
Position: Inspection Engineer Surveyor
Location: Mundra, Gujarat
- Inspected LSAW bare pipe and 3LPE coating.
2023
Client: ADNOC
China Petroleum Pipeline Engineering Company- Abu Dhabi
Vendor: Man Industries Ltd., Anjar
Product: LSAW and spiral bare line pipe, 48-inch OD, API 5L L450M/X65M PSL2
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
Client: Rushmore Enterprises Inc
Rush Pipeline Project
Vendor: Surya Roshni Ltd., Anjar
Product: ERW pipe
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
2022
Client: ADNOC Onshore
JSW SAMAGOGA
Vendor: KTI Middle East Co LLC
Product: Hot induction bends, 5D radius, IB 450 PSL-2 sour service
Position: Inspection Engineer Surveyor
- Inspected raw materials, WPS, welding PQT, physical and chemical tests, dimensions, hydro testing and NDT for nine bends.
MAY 2021 – AUG 2021
Client: HRRL/EIL
EPCC-16 Mongla Crude Oil Pipeline and Associated Facilities
Vendor: JSIW Infrastructure Pvt. Ltd.
Product: 55 km HFW pipe, X70M PSL2, external dual-layer FBE coating
Position: Inspection Engineer Surveyor
Location: Mongla
- Inspected raw materials, WPS, qualification testing, physical and chemical tests, dimensions, hydro testing, NDT and coating raw materials.
- Inspected bare pipe inlet, coating application, epoxy and adhesive-coated pipe, 3LPE-coated pipe and final inspection.
Client: IOCL Dagoba / Guwahati Refinery
Anup Engineering
Vendor: Anup Engineering
Product: Large vertical columns, CS
Position: Inspection Engineer Surveyor
Client: KPCL Refinery
Ishan Equipment’s Pvt. Ltd.
Vendor: Ishan Equipment’s Pvt. Ltd.
Product: Small to medium vessels and heat exchangers
Position: Inspection Engineer Surveyor
Client: MRPL/CDU VDU Project
Medium Size Heat Exchangers
Vendor: Anup Engineering
Product: Medium size heat exchangers
Position: Inspection Engineer Surveyor
Client: Cryogenic liquid storage terminal, Jetty Pipeline Kandla
Cryogenic liquid storage terminal, Jetty Pipeline Kandla
Vendor: AEGIS Logistic
Product: API 5L PSL2 X70M line pipe
Position: Inspection Engineer Surveyor
Location: Kandla
Client: Dangote Refinery and Petrochemical Project, Nigeria
Dangote Refinery and Petrochemical Project
Vendor: M/s. Jindal Saw Limited, Nanakapaya
Product: 36-inch LSAW pipe with 3LPE coating, API 5L Grade X70 PSL2
Position: Inspection Engineer Surveyor
Location: Nigeria
Client: ONGC
PRP-6/VML
Vendor: Jindal Pragpar
Product: 12.75-inch pipe, API 5L X60Q/X60QS
Position: Inspection Engineer Surveyor
Client: Baker Hughes
Baker Hughes Project
Vendor: Praj Industries
Product: Suction volume bottle, discharge volume bottle and recovery tank
Position: Inspection Engineer Surveyor
Client: Barossa Project
Barossa Project
Vendor: Welspun Corp Ltd. PBM Plant
Product: Hot induction bends, 6D radius
Position: Inspection Engineer Surveyor
05 Oct 2020 – 14 Apr 2021
Client: Public Authority of Water of Sultanate of Oman
Reinforcement of AD Dahlia Water Transmission System – Phase II
Vendor: L&T
Product: 148 km submerged arc helical welded pipe, API 5L L360 PSL1, external 3LPE and internal liquid paint coating
Position: Inspection Engineer Surveyor
Location: Oman
Client: M/s. NFPT
M/s. Ratnamani PBM
Vendor: M/s. Ratnamani PBM
Product: Hot induction bends with FBE coating
Position: Inspection Engineer Surveyor
Client: IOCL
IOCL
Vendor: Man Industries India Ltd., Anjar
Product: LSAW pipe and coating plant
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
Client: ENI IRQ B.V.
Zubair Oil Field Development Project
Vendor: PBM
Product: Hot induction bends
Position: Inspection Engineer Surveyor
Client: IOCL
Laying of 42-inch OD Submarine Pipeline and Installation of SPM System in Gulf of Kutch off Vadinar, Gujarat
Vendor: Welspun LSAW
Product: 42-inch CWC pipe
Position: Inspection Engineer Surveyor
Location: Gulf of Kutch, Vadinar, Gujarat
19 Sep 2019 – 19 Jun 2020
Client: GIGL
Mehsana-Bhatinda Pipeline Project (Natural Gas Pipeline)
Vendor: JSIW Infrastructure Pvt. Ltd.
Product: 252 km submerged arc helical welded pipe, API 5L L485M PSL2, external 3LPE and internal liquid paint coating
Position: Inspection Engineer Surveyor
Client: IOCL
IOCL
Vendor: Man Industries Ltd. and Welspun Corp Ltd., Anjar
Product: HSAW and LSAW pipe and coating plant
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
Client: ADNOC
ADNOC
Vendor: Jindal Saw Ltd.
Product: L-SAW pipe plant
Position: Inspection Engineer Surveyor
Client: ENI East Spingarn Me Rakes Development Project
ENI East Spingarn Me Rakes Development Project
Vendor: Welspun Corp Ltd., Dahaj
Product: ISO 3183 L450MO PSL2 offshore non-sour service pipe
Position: Inspection Engineer Surveyor
Location: Dahaj, Gujarat
Client: KELOSKER Pneumatic Company Ltd
ONGC Ankleshwar CTF Side
Vendor: RATNAMANI TUBE & METAL
Product: Fabrication and structure, IS2062
Position: Inspection Engineer Surveyor
Location: Ankleshwar
Client: GAIL, KKBMPL Project
GAIL (PHII) KKBMPL Project
Vendor: Ratnamani Tube & Metal
Product: ERW pipe and coating plant
Position: Inspection Engineer Surveyor
Client: City Gas
City Gas
Vendor: Welspun Corp Ltd.
Product: L360M/X52M PSL2 pipe with 3LPE coating
Position: Inspection Engineer Surveyor
Client: IOCL
IOCL
Vendor: Welspun Corp Ltd.
Product: API 5L PSL2 X70M pipe
Position: Inspection Engineer Surveyor
Client: Saipem Project
Saipem Project
Vendor: Jindal Saw Ltd.
Product: API 5L Grade X70M PSL JCO pipe with 3LPE coating
Position: Inspection Engineer Surveyor
Client: IOCL
Paradeep to Haldia
Vendor: Ratnamani Tube & Metal
Product: API 5L PSL2 X70M pipe
Position: Inspection Engineer Surveyor
Client: IOCL and Gail
IOCL & Gail Baronage Pipeline
Vendor: Surya Global Steel Tube Ltd., Welspun Corp Ltd. and Man Industries India Ltd.
Product: API 5L PSL2 X70M and L485M/X70M pipe
Position: Inspection Engineer Surveyor
Client: ADNOC Gas
ESTIDAMA Sales Gas Pipeline Network Enhancement Package 4 & 7: Shuweib Sajaa Pipeline and Margham Pipeline
Vendor: Jindal SAW Ltd., Kutch
Product: 30-inch and 48-inch hot induction bends
Position: Inspection Engineer Surveyor
Location: Kutch
- Performed regular bend production inspection and testing.
Client: ADNOC Gas
ESTIDAMA Sales Gas Pipeline Network Enhancement Package 6 – From Sweihan to Al Shuwaib
Vendor: Welspun Corp Ltd., Anjar
Product: PSL2 SAWL pipe and 5D-radius hot induction bends
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected fabrication, inspection and testing of MPQT bends.
Client: ADNOC Gas
EPC Works for LNG Compression Facility at Habshan Gas Complex
Vendor: Ratnamani Metals & Tubes Ltd., LSAW Pipe Division
Product: Welded carbon steel and low-temperature carbon steel pipes
Position: Inspection Engineer Surveyor
Location: Anjar, Gujarat
- Inspected raw material, welder and welding operator qualification, stress-relieving heat treatment, weld-bead chemical analysis and work against the approved ITP.
Client: Oil SERV
SS Pipes & Tube Inspection
Vendor: Venus Pipes and Tubes Limited
Product: TP 316/316L stainless steel pipes and tubes
Position: Inspection Engineer Surveyor
- Reviewed RMTC, raw material testing, heat treatment, mechanical and chemical tests and hydrostatic testing.
- Performed pipe dimension inspection for outside diameter, wall thickness and length.
Client: ADNOC
SS Pipes & Tube Inspection
Vendor: Venus Pipes and Tubes Limited
Product: TP 316/316L stainless steel pipes and tubes
Position: Inspection Engineer Surveyor
- Reviewed RMTC, raw material testing, heat treatment, mechanical and chemical tests and hydrostatic testing.
- Performed pipe dimension inspection for outside diameter, wall thickness and length.
Client: Petroleum Development Oman
Dhiab Infill Development
Vendor: Ratnamani Metals and Tubes
Product: ASTM A358 TP316/316L Class 1 stainless steel tubes
Position: Inspection Engineer Surveyor
Location: Oman
- Reviewed RMTC, raw material testing, heat treatment, mechanical and chemical tests and hydrostatic testing at 1000 PSIG.
- Performed dimensional and visual inspection and confirmed no cracks, sweats, leaks or injurious surface defects.
Skills
- QA/QC Management
- Third-Party Inspection
- Steel Pipe and Tube Inspection
- Welding Inspection
- NDT (UT, RT, PT, MT, VT and Eddy Current)
- Pressure Vessel Inspection
- Heat Exchanger Inspection
- Pipeline Inspection
- Coating / Painting Inspection
- Concrete Weight Coating Inspection
- Material Inspection and Traceability
- Vendor Inspection
- Expediting
- WPS / PQR / WPQR Review and Qualification
- Welder Qualification
- Quality Management Systems
- Inspection and Test Plan Review
- Quality Documentation
- Client and TPI Coordination
Commodities
- Steel Pipes
- ERW Pipes
- HFW Pipes
- HSAW Pipes
- LSAW Pipes
- Tubes
- Hot Induction Bends
- Coil
- Plate
- Pressure Vessels
- Heat Exchangers
- Storage Tanks
- Columns
- Reactors
- Piping
- Pipe Fittings
- Flanges
- Valves
- Boilers
- Steam Drums
- Skids
- Tube Sheets
- Baffles
- Tube Bundles
- Structural Steel
- Solar Project Equipment
- Coating Material
- Concrete Weight Coating
- Welding Consumables