SREERAG AROLI VEETTIL

SREERAG AROLI VEETTIL is a qualified E&I technical expert with 11+ years of experience across quality control, business development, sales, estimation and procurement. He has supported Petrochemical, Oil & Gas and construction projects, with hands-on experience in the installation, testing and commissioning of electrical equipment. His inspection and quality scope covers E&I systems, DCS/SCADA, F&G/ESD systems, generators, transformers, switchgear, cables, telecom and security systems. He reviews and approves quality documentation, ITPs and electrical drawings, coordinates with clients, contractors, vendors and sub-vendors, and attends FAT and SAT activities. He also completed Ex-Inspection Test Reports with no outstanding punch-list items before energization of potentially explosive equipment.

Education

Work Experience

Aug 2025 – Present TPI AGENCY

Inspection Engineer

Monitored all aspects of Quality Control relative to welding during construction to ensure adherence to the company’s technical requirements and applicable codes.
Reviewed Quality Plans, ITPs and project specifications based on client specifications.
Handled and coordinated with clients, main contractors, vendors and sub-vendors for project works, maintained project schedules and attended FATs and SATs according to main contractor schedules.
Performed visual, closed and detailed grades of inspection and submitted reports.
Completed Ex-Inspection Test Reports (Ex ITR) with no outstanding punch-list items prior to energization for potentially explosive equipment.
Checked and verified specifications, procedures, and electrical and instrument installations against client specifications.
Verified DCS, SCADA, F&G and ESD system panels against GA drawings and BOMs.
Performed power-up, redundancy and I/O simulation tests for DCS, FGC, MMS and other systems.
Witnessed transformer and generator-set load tests according to FAT procedures.
Checked generator output, phase currents, voltage, frequency and vibration parameters.
Performed load verification at different stages and checked line voltage and current.
Witnessed heat-soak tests for different types of panels and systems.
Performed generator functional tests according to FAT checklists, including manual and automatic start/stop, emergency stop, voltage and speed adjustment, and meter-function checks.
Visually inspected complete generators, including alternators and panels, against GA drawings.
Verified engine cooling-system coolant levels at radiators.
Witnessed vibration and noise-level tests.
Inspected cable termination, cable dressing, cable glanding, cable identification and cable torquing.
Inspected cathodic protection systems and witnessed routine tests.
Monitored and witnessed pre-commissioning and FAT activities for generator sets up to 1000 kW.
Inspected material receiving against certificates, datasheets and client specifications.
Reviewed and signed off ITRs for electrical and instrument installation and testing.
Witnessed calibration activities for gauges and transmitters.
Inspected load cells and witnessed calibration of weighing machines according to FAT procedures or specifications.
Witnessed load tests for cranes and hoists.
Monitored and witnessed pre-commissioning activities.
Reported inspection activities to the Company Representative.
Assisted with fabrication final-dossier documentation for handover of construction, installation, inspection and test scopes.
Ensured E&I work complied with project safety policies and procedures.
Ensured PPE requirements were enforced and participated in the safety program and safety goals.
Controlled and inspected consumables according to client requirements.
Offered completed jobs to the client for inspection according to the inspection and test plan.
Monitored inspection activities from inward material inspection through final products ready for dispatch.
Witnessed DCS FAT and ITP stage-wise activities.
Visited vendor facilities to check manufacturing progress, monitor purchase-order progress and identify ways to increase production and accelerate material delivery.
Performed material inspection, MTC review, in-process quality checks, monitoring of intermediate stages, final inspection, FAT, data-book review and packing inspection.
Prepared reports for performed activities.
Witnessed continuity, insulation and high-voltage tests for HV, MV and LV cables.
Performed dimensional, welding and painting inspections and monitored and supervised related activities.
Reviewed consumables test certificates and calibration certificates for measuring instruments and equipment.

Feb 2024 – Jul 2025 National Electricity and Water Construction (NEWCON)

Electrical Inspection Engineer

Jan 2018 – Jan 2024 Kerala State Electricity Board Ltd

Substation Operator & Maintenance Engineer

Jul 2014 – Dec 2017 Kerala State Electricity Board Ltd

Site Engineer -Transmission Construction

Conducted electronics quality control by inspecting, testing and measuring electronic components using oscilloscopes, millimetres, spectrum analysers and power supplies to ensure compliance with specifications.
Monitored and controlled substation equipment, including transformers, circuit breakers and switchgear.
Operated SCADA systems to supervise electrical flows and respond to alarms or faults.
Performed switching operations to isolate or energize sections of the power grid safely.
Coordinated with dispatch and control centers for load management and system stability.
Inspected equipment for signs of wear, overheating or malfunction.
Assisted or supervised preventive and corrective maintenance activities.
Maintained records of equipment performance, incidents and repair work.
Enforced safety procedures and permit systems during maintenance and emergency repairs.
Ensured proper grounding and isolation during switching or servicing tasks.
Responded to system alarms, faults and outages, taking corrective actions.
Logged operational data, including voltages, currents and event timelines.
Reported faults, equipment anomalies and power outages to relevant departments.
Prepared shift reports and handover documentation for incoming operators.
Maintained records of load readings, equipment status, switching operations and incidents.
Coordinated with field crews and engineers during equipment testing or fault resolution.
Communicated with transmission and distribution centers during load transfers or emergencies.
Coordinated switching and maintenance operations with load dispatch centers, field technicians and engineers.

PROJECT	CLIENT	VENDOR	COMMODITY
HAIL & GHASHA DEVELOPMENT PROJECT PACKAGE 2 - ONSHORE FACILITIES	TECHNIMONT	ELSEWEDY DIGITAL	TELECOM SYSTEM EQUIPMENTS/ACS/CCTV/LAN
HAIL & GHASHA DEVELOPMENT PROJECT PACKAGE 2 - ONSHORE FACILITIES	TECHNIMONT	ELSEWEDY DIGITAL	SECURITY SYSTEM CABINET (ACS & CCTV/LAN)- FACTORY ACCEPTANCE TEST, PACKING INSPECTION
KARACHAGANAK EXPANSION: THE 2ND (KEP1B) PHASE OF CONSTRUCTION. WKO, KARACHAGANAK OIL & GAS CONDENSATE FIELD (KOGC).	MERLION SICIM	AESTHETIX	TELECOM SYSTEM EQUIPMENTS
NEOM GREEN HYDROGEN ELEMENTS	AIR PRODUCTS	EMIRCOM	TELECOM SYSTEM EQUIPMENTS/PACKAGE
SYAMA ROSTER PROJECT	IQS	NEELKANTH CABLES	ELECTRICAL CABLES-LV/MV
ADNOC GAS PROCESSING EXECUTE STAGE RUWAIS CAPACITY ENHANCEMENT OF NGL TRAINS 1, 2, 3 & 4	L & T	CORTEM GULF	CABLE GLANDS & ELECTRICAL FITTINGS AND CONDUITS
DP161 WQ CS8 NEW TEG PACKAGE	SLB	INTEGRATED INDUSTRIES	FINAL INSPECTION GENERATORS-EMERGENCY DIESEL GENERATOR-PACKAGE
BUZIOS FIELD AREA DEVELOPMENT PETROBRAS 82	REI PROCESS PTY LIMITED	AL GURG	DIESEL GENERATOR
EPC FOR BAB FACILITIES UPGRADE PROJECT	ROBT STONE	ABB	DIESEL GENERATOR
HV/LV ELECTRICAL SYSTEM UPGARDE AT USSC	FALCOR ENGINEERING	CUMMINS	FAT -GENERATOR SYSTEM-DIESEL GENERATOR
AR RATAWI GAS MIDSTREAM PROJECT	AKT OIL SERVICES COMPANY	BERG INDUSTRIES LLC	PREFABRICATED OUTDOOR SUBSTATION FOR CAMP (E HOUSE)-FACTORY ACCEPTANCE TEST
PROJECT CERES	JV-NPCC- SAIPEM	CB&I AUSTRALIA & ZENNER MEASURING CONTROL SYSTEMS INSTALLATION AND REPAIRING LLC	HONEYWELL PRESSURE TRANSMITTER – VISUAL, HYDRO TEST, POWER ON TEST, REVIEW OF TEST CERTIFICATE & REPORT
BOROUGE4 PROJECT	TECHNIMONT	SAS POWER INDUSTRIES FZE	HVAC PANEL &DISTRIBUTION PANEL-VISUAL, DIMENSION, HV TEST, IR TEST, FUNCTIONAL TEST OF SWITCHGEAR, PRIMARY INJECTION OF CT, SECONDARY INJECTION, CIRCUIT CONTACT RESISTANCE TEST.
EPCM FOR BAB FAR NORTH FULL FIELD DEVELOPMENT PROJECT (BFN	KENT	EMERSON FZE	PREDICTIVE EMISSION MONITORING SYSTEM (PEMS) - FAT FOR PEMS SOFTWARE
DAMMAM AIRPORT (DACO) PROJECT	ENERGIA	FEDERAL POWER TRANSFORMERS LLC	20/26 MVA POWER TRANSFORMER - FACTORY ACCEPTANCE TEST

SREERAG AROLI VEETTIL

Summary

Education

Work Experience

Projects

Languages

Skills

Commodities