YOGESH KUMAR

Summary

YOGESH KUMAR is an experienced QA/QC professional with over 20+ years in welding inspection, NDT, and quality assurance across LSAW pipe manufacturing and structural fabrication. He has extensive experience in inspection coordination, expediting, client and TPI interface, documentation control, and compliance with international standards and project ITP requirements. His technical scope includes LSAW production QC, forming, SAW welding, hydro testing, finishing, welding procedure and welder qualification, NDT monitoring, and shop-floor inspection. He has handled large-scale oil and gas pipeline projects and supported quality performance in manufacturing environments. He also leads QC manpower planning, client coordination, vendor inspection, manufacturing progress monitoring, and recovery planning for potential delays.

extraction may be condensed — fewer details than the source suggests; review or regenerate

Codes & Standards

API 5L 45th Edition 2012

API 5CT

ISO 15590-1

MSS-SP-75

ASME B16.49

ASME Section IX

AWS D1.1

ASNT SNT-TC-1A

ASME Section V-2015

ISO 10893-9-2011

EN BS 5996

EN 10246-15

ASTM A435

ASTM A578

SEL072

ISO 10893-11-2011

ASTM E273

ASTM E164-2013

ASTM E587-10

ISO 10893-8-2011

ASTM E213-2014

ASTM A578/ASTM A435-2012

ASTM E94-2010

ISO 19232-2013

ASTM E1815-08/ISO 11699-2008

ASTM SE-1079-2010

ISO 10893-6:2011

ISO 10893-5-2011

ASTM E709:2014

API 1104

ASME Section II-C

ASTM A370

ASTM A751

ISO 3183

ASME Section VIII

NACE MR-0175/ISO 15156

Work Experience

Mar 2008 – Present Jindal Saw Limited

SENIOR EXECUTIVE (QA/QC)

Prepared and reviewed Welding Procedure Specifications (WPS) and qualified Procedure Qualification Records (PQR) as per ASME Section IX for line pipes.
Reviewed and approved welding procedures and Welder Qualification Tests (WQT/WPQ).
Ensured welding activities were performed as per approved WPS, PQR, QAP, and ITP.
Organized and monitored Welder, Blaster, and Painter Qualification Tests in coordination with Third Party Inspection (TPI).
Monitored SAW, SMAW, and GMAW (MIG/MAG) welding processes used in pipe manufacturing.
Conducted pre-welding inspections covering edge preparation, bevel angle, root face, root gap, alignment, top/bottom/face verification, and fit-up.
Monitored welding parameters including travel speed, voltage, current, polarity, welding direction, technique, and interpass temperature.
Supervised preheating, post-heating, and Post Weld Heat Treatment (PWHT) activities.
Inspected welding machines, holding ovens, electrode quivers, and related equipment against valid calibration certificates.
Monitored storage and usage of welding consumables and flux as per procedure requirements.
Managed inward material inspection, in-process inspection, final inspection, and product release.
Performed plate inspection, heat number verification, and full material traceability control.
Carried out stage-wise fabrication inspection covering material verification, forming, fit-up, welding, pre-visual inspection, finishing, final visual inspection, and dimensional inspection.
Inspected casing, tubing, couplings, pup joints, and accessories, including API and premium thread inspection.
Performed raw material identification, inspection, and testing.
Supervised and interpreted UT, RT, MPT, LPT/DPT, MFL, ECT, AUT, and VT activities.
Reviewed radiography films and identified weld defects.
Calibrated and periodically verified NDT instruments and measuring equipment.
Maintained complete NDT, mechanical, and chemical testing records.
Witnessed and verified hydro tests as per API 5L PSL-2 requirements.
Inspected and monitored 3LPE and FBE coating activities and reviewed laboratory testing reports related to coating quality.
Inspected pipe receiving, fit-up, girth welding, PAUT, final inspection, and testing reports for the Double Jointer plant.
Inspected coupler plant activities including raw material inspection, pipe/pin/box inspection, connector fit-up with telescope/laser beam, preheat, GMAW/SAW welding, PWHT, varnish protection, final inspection, and testing reports.
Prepared and reviewed QAPs, ITPs, stage-wise inspection reports, welding inspection reports, final dossiers, and release notes.
Reviewed Material Test Certificates (MTC 3.1/3.2) and test reports.
Maintained quality documentation for ISO and API audits and supported internal and external audits.
Handled Non-Conformance Reports (NCRs) and implemented Corrective & Preventive Actions (CAPA).
Coordinated with clients, TPI agencies, and vendors for inspection activities.
Conducted Pre-Inspection Meetings (PIM) and Pre-Production Meetings (PPM).
Performed third-party inspection roles at vendor locations when required.
Performed vendor inspection and expediting activities to ensure timely compliance.
Reviewed daily inspection reports and monitored KPIs.
Planned manpower per shift based on skill matrix and competency levels.
Implemented Kaizen and 7 QC Tools to reduce customer complaints, in-house rejection, and rework percentage.
Led the QA/QC team and supported production in achieving quality and delivery targets.
Monitored manufacturing status, prepared weekly/monthly progress reports, raised delay alarms, forecast potential slippages, and proposed mitigation and recovery plans.
Supported Project Management with supplier work-progress updates and alerts concerning anticipated quality-related delays.

Jan 2004 – Feb 2008 MPS Pvt. Ltd.

QC Engineer

Inspected structural fabrication and welding activities.
Verified WPS/PQR and monitored welder qualifications.
Performed dimensional and visual inspection of fabricated structures.
Coordinated NDT activities and verified NDT reports.
Performed material inspection and traceability control.
Prepared inspection records and reports.
Coordinated with client inspectors and project engineers.

Projects

Name of Employer	Name of Client	Name of Project	Name of Pipe /Equipment’s Manufacturer	Size & Specification of Pipe / Plate/Equipment’s
M/S SCI	SGTM & STAM Joint Ventury -MOROCCO	JorfDesalinted Water Pipeline Project.	M/s.Man Industries India Ltd. Anjar	hot induction of Carbon Steel Line Pipe s(L-SAW & 3LPE Coating, HSS Coating & Internal Coating) Size-1320.8 x 25.40, 23.83 mm, 609.6 x 12.70, 7.14 mm WT. Grade:API 5L L485 X70M PSL2 Bend Size:5D,6D 10D Radius Grade: API 5L L485 X70M PSL2
M/S Applus India Pvt. Ltd.	Sicilsaldo S.p.A, Lybian Branch	Provision Of Engineering, Procurement, Construction and Commissioning At Chadar Field Project.	M/s Welspun Corp. Ltd. Anjar	Carbon Steel Line Pipes(ERW& 3LPE Coating) Size-914.4 x 35.10 mm, 863.6 x 27.34 mm WT. Grade: API 5L L485 X52M PSL2
M/S Hertaz Inspection & Services Pvt. Ltd.	M/s. North Oil Company, Doha Qatar. & Subsea Seven Doha Oil & Gas Services and Trading LLC.	AL Shaheen Oil Field Qatar Gallaf Project - WHP03	M/s. Welspun Corp. Ltd. Anjar	hot induction of Carbon Steel Line Pipes(CWC & 3LPE Coating) Size-508 x 15.09 mm, 203.2 x 12.70 mm WT. Grade:X65MQO API 5L PSL2 ZEBRA PIPE-TYPE-1
M/S TUV NORD MIDDILE EAST	ADNOC OFFSHORE (NPCC)	LOWER ZAKUM LONG TERM DEVELOPMENT PHASE-1 (LZ LTDP-1) NEW MAIN GAS LINE (NMGL) Project	M/s Jindal Nanakapaya Mundra	hot induction of Carbon Steel Line Pipes (SAW) API 5L Size-879. x 27.34 mm, 894.50 mm x 35.10mm WT., Grade: L450MS/L450MO PSL2, NACE MR-0175/ISO 15156
M/S Tata Project Ltd.	Adani Green Energy Ltd.	Khavda Solar Project	Jash Energy Pvt. Ltd.	Galvanizes Structural Steel (Solar Module Mounting Structure) Fabrication & Galvanized Coating
M/S-BVIL	HOWEEngineering Projects (India) Pvt. Ltd.	Copper Cocentrate & Rock phosphate Handling at Mundra West Port	Thyssenkrupp Industries India Pvt. Ltd. Pimpri Pune	Conveyor – Structural Steel Fabrication and Erection
M/S-BVIL	HOWEEngineering Projects (India) Pvt. Ltd.	BOW String Girder for Proposed of Bridge No. 21 (ROB) at Devaliya Gujrat	Satec Envir Engineering (I) Pvt. Ltd. Bhuj	Welded 42 Mtr. BOW String Girder Clear Span Fabrication
M/S-APPLUS	Gerab National Enterprises L.L.C	Borouge-4 Ruwais – U.A. E	Ratnamani Metals & Tubes LTD. Anjar	Pipe Welded SS Different Sizes
M/S-APPLUS	Air Products Equipment Ltd. UK	Stem drum, riser, header, Neom Green Hydrogen Elements	Inox India Pvt. Ltd. Vadodara	Pressure Vessel Storage Tank (Inner Vessel)
M/S-REENA	Siemens Energy	Grudziadz Project	DEE Development Engineers Limited Anjar	Ammonia Injection Grid Fabrication
M/S-BVIL	SapuraOMV Upstream (Sarawak) Inc.	SK408W Jerun field Development Project	M/s. Welspun Corp Ltd. Anjar	L-SAW 30’’ MM OD X 19.05 MM, 23.83MM, 28.37 MM W.T.
M/S-BVIL	Paradip Numaligarh Refinery Ltd.	Paradip Numaligarh Crude Oil Pipeline Project	M/s. Mega Pipes Khapoli Maharashtra	H-SAW and 3LPE Coating 26’OD X 9.2 mm W.T.
M/S DR Amin	IOCL Limited	Connectivity From IP-102A (Asanur) Of ETBPNMTPL to PPN Power and CBR Refinery Project	M/s Man Industries India LIMITED	L-SAW and 3LPE Coating 16’’OD X 7.92,9.53,11.13 mm W.T.
M/S DR Amin	AGP CGD Limited	AGP CGD Project	M/s RATNAMANI METALS & TUBES LIMITED	ERW 12’’OD X 6.4,9.0 mm W.T.
M/S-BVIL	M/s GAIL INDIA LIMITED	SRIKAKULAM-ANGUL PIPELINE PROJECT (SAPL)	M/s. MAN INDUSTRY Khedoie	L-SAW and 3LPE Coating, CWC 18’’OD X 8.10, 9.60 mm W.T.
M/s- GLIS	IOCL Limited	IHB (IOCL) Project	M/s Welspun Anjar	ERW and 3LPE Coating 12’’OD X 8.4 mm W.T.
M/s- GLIS	IOCL Limited	IHB (IOCL) Project	M/s RATNAMANI METALS & TUBES LIMITED	L-SAW 32’’OD X 9.2,12.04 mm W.T.
M/S-BVIL	PARADIP NUMALIGARH REFINERY LTD.	PARADIP NUMALIGARH CRUDE OIL PIPELINE PROJECT	M/s. SURYA ROSHNI LTD. ANJAR	L-SAW and 3LPE Coating 32’’OD X 19.05, 22.23, 23.83 mm W.T.
M/S-BVIL	M/s INDRADHANUSH GAS GRID LIMITED	NORTH-EAST GAS GRID PIPELINE PROJECT (PHASE-1)	M/s Welspun Anjar	H-SAW and 3LPE Coating 24’’OD X 12.70 mm WT
M/S-BVIL	GUJARAT STATE PETRONET LIMITED	SUPPLY OF 3LPE COATED ERW LINE PIPES	M/s RATNAMANI METALS & TUBES LIMITED	HFW 6’’ OD X 6.40 & 7.90 mm W.T.
M/S-BVIL	NUMALIGARH REFINERY LIMITED	PARADIP NUMALIGARH CRUDE OIL PIPELINE PROJECT (PNCPL)	M/s. SURYA ROSHNI LTD. ANJAR	H-SAW and 3LPE Coating 26’’ OD X 9.20 mm W.T.
M/S-BVIL	DHAMRA LNG TERMINAL PVT. LTD. (DLTPL) ADANI	LNG Import, Storage & Regasification Terminal Project (RLNG Pipeline) Project	M/s Welspun Anjar	L-SAW and 3LPE Coating 36’’OD X 25.4mm W.T.
M/S-BVIL	CPC Corporation Taiwan	36” API 5L PSL1 LINE PIPE PURCHASE NO. G26081001 OF CPC CORPORATION TAIWAN	M/s. JINDAL Nanakapya-Mundra	L-SAW and 3LPE Coating, CWC 36’’ OD X 23.50, 22.40 mm W.T.
M/s BVIL	ONGC Ltd.	----	PSL Ltd.	L-SAW and 3LPE Coating & CWC Coating 36’’OD X 25.4mm W.T.
BVIL	M/S GAIL	M/S KGB Project	Welspun Corp	18’’ODX11.1mm,12.7mm,14.3mm WT HSAW and 3LPE Coating
INTERTEK INDIA PVT LTD	M/S IOCL	Ennore Thiruvallur Bengluru Puduchhery Nagapattinam Madurai Project	Welspun Corp	406.4mmODX7.92mm,14.27mm 15.88mm WT LSAW,3LPE & Internal Coating
BVIL	M/S GAIL	Dhobi Durgapur Pipeline Project	Welspun Corp	30’’ODX12.50mm,14.80mm WT HSAW and 3LPE Coating
BVIL	M/S L&T (GSPL)	Barmari Pali Pipeline Project	Essar Steel India Ltd	457mmODX 6.6mm WT,7.9mm WT,9.5mm WT & 11.7mm WT.API 5LX70 PSL-2 LSAW and 3LPE Coating.
BVIL	Ishan Equipment’s Pvt. Ltd	KPCL Refinery	Chemical injection package, Small to Medium Size Vessel and exchange, Material LTCS, CS & SS, Chemical injection package, Small to Medium Size Vessel and exchange, Material LTCS, CS & SS
BVIL	M/S L&T (GSPL)	PPPL (GSPL)	Essar Steel India Ltd	762mm OD X 15.3mm WT & 15.7mm WT,19.4mm WT.API 5LX70 PSL-2 LSAW and 3LPE Coating.
BVIL	Essar Projects Construction Ltd (GIGL)	Jalandhar Amritsar Pipeline Project	Essar Steel India Ltd	406 mm OD X 6.4mm WT & 7.5mm WT and 09mm WT & 11.2mm WT.API 5LX65 PSL-2 LSAW & 3LPE Coating
BVIL	ONGC Ltd.	PRP 04	Jindal Ltd.	L-SAW and 3LPE Coating & CWC Coating 36’’OD X 25.4mm W.T.
Toyo Engineering	MRPL/CDU VDU PROJECT	Anup Engineering	Medium Size Heat Exchangers/Chemical injection package All Stage Inspection As Material Identification In Process Inspection, Final Inspection, NDT, Welding, And Painting etc.,

Name of Employer

Name of Client

Name of Project

Name of Pipe /Equipment’s Manufacturer

Size & Specification of Pipe / Plate/Equipment’s

M/S SCI

SGTM & STAM Joint Ventury -MOROCCO

JorfDesalinted Water Pipeline Project.

M/s.Man Industries India Ltd. Anjar

hot induction of Carbon Steel Line Pipe s(L-SAW & 3LPE Coating, HSS Coating & Internal Coating) Size-1320.8 x 25.40, 23.83 mm, 609.6 x 12.70, 7.14 mm WT. Grade:API 5L L485 X70M PSL2 Bend Size:5D,6D 10D Radius Grade: API 5L L485 X70M PSL2

M/S Applus India Pvt. Ltd.

Sicilsaldo S.p.A, Lybian Branch

Provision Of Engineering, Procurement, Construction and Commissioning At Chadar Field Project.

M/s Welspun Corp. Ltd. Anjar

Carbon Steel Line Pipes(ERW& 3LPE Coating) Size-914.4 x 35.10 mm, 863.6 x 27.34 mm WT. Grade: API 5L L485 X52M PSL2

M/S Hertaz Inspection & Services Pvt. Ltd.

M/s. North Oil Company, Doha Qatar. & Subsea Seven Doha Oil & Gas Services and Trading LLC.

AL Shaheen Oil Field Qatar Gallaf Project - WHP03

M/s. Welspun Corp. Ltd. Anjar

hot induction of Carbon Steel Line Pipes(CWC & 3LPE Coating) Size-508 x 15.09 mm, 203.2 x 12.70 mm WT. Grade:X65MQO API 5L PSL2 ZEBRA PIPE-TYPE-1

M/S TUV NORD MIDDILE EAST

ADNOC OFFSHORE (NPCC)

LOWER ZAKUM LONG TERM DEVELOPMENT PHASE-1 (LZ LTDP-1) NEW MAIN GAS LINE (NMGL) Project

M/s Jindal Nanakapaya Mundra

hot induction of Carbon Steel Line Pipes (SAW) API 5L Size-879. x 27.34 mm, 894.50 mm x 35.10mm WT., Grade: L450MS/L450MO PSL2, NACE MR-0175/ISO 15156

M/S Tata Project Ltd.

Adani Green Energy Ltd.

Khavda Solar Project

Jash Energy Pvt. Ltd.

Galvanizes Structural Steel (Solar Module Mounting Structure) Fabrication & Galvanized Coating

M/S-BVIL

HOWEEngineering Projects (India) Pvt. Ltd.

Copper Cocentrate & Rock phosphate Handling at Mundra West Port

Thyssenkrupp Industries India Pvt. Ltd. Pimpri Pune

Conveyor – Structural Steel Fabrication and Erection

M/S-BVIL

HOWEEngineering Projects (India) Pvt. Ltd.

BOW String Girder for Proposed of Bridge No. 21 (ROB) at Devaliya Gujrat

Satec Envir Engineering (I) Pvt. Ltd. Bhuj

Welded 42 Mtr. BOW String Girder Clear Span Fabrication

M/S-APPLUS

Gerab National Enterprises L.L.C

Borouge-4 Ruwais – U.A. E

Ratnamani Metals & Tubes LTD. Anjar

Pipe Welded SS Different Sizes

M/S-APPLUS

Air Products Equipment Ltd. UK

Stem drum, riser, header, Neom Green Hydrogen Elements

Inox India Pvt. Ltd. Vadodara

Pressure Vessel Storage Tank (Inner Vessel)

M/S-REENA

Siemens Energy

Grudziadz Project

DEE Development Engineers Limited Anjar

Ammonia Injection Grid Fabrication

M/S-BVIL

SapuraOMV Upstream (Sarawak) Inc.

SK408W Jerun field Development Project

M/s. Welspun Corp Ltd. Anjar

L-SAW 30’’ MM OD X 19.05 MM, 23.83MM, 28.37 MM W.T.

M/S-BVIL

Paradip Numaligarh Refinery Ltd.

Paradip Numaligarh Crude Oil Pipeline Project

M/s. Mega Pipes Khapoli Maharashtra

H-SAW and 3LPE Coating 26’OD X 9.2 mm W.T.

M/S DR Amin

IOCL Limited

Connectivity From IP-102A (Asanur) Of ETBPNMTPL to PPN Power and CBR Refinery Project

M/s Man Industries India LIMITED

L-SAW and 3LPE Coating 16’’OD X 7.92,9.53,11.13 mm W.T.

M/S DR Amin

AGP CGD Limited

AGP CGD Project

M/s RATNAMANI METALS & TUBES LIMITED

ERW 12’’OD X 6.4,9.0 mm W.T.

M/S-BVIL

M/s GAIL INDIA LIMITED

SRIKAKULAM-ANGUL PIPELINE PROJECT (SAPL)

M/s. MAN INDUSTRY Khedoie

L-SAW and 3LPE Coating, CWC 18’’OD X 8.10, 9.60 mm W.T.

M/s- GLIS

IOCL Limited

IHB (IOCL) Project

M/s Welspun Anjar

ERW and 3LPE Coating 12’’OD X 8.4 mm W.T.

M/s- GLIS

IOCL Limited

IHB (IOCL) Project

M/s RATNAMANI METALS & TUBES LIMITED

L-SAW 32’’OD X 9.2,12.04 mm W.T.

M/S-BVIL

PARADIP NUMALIGARH REFINERY LTD.

PARADIP NUMALIGARH CRUDE OIL PIPELINE PROJECT

M/s. SURYA ROSHNI LTD. ANJAR

L-SAW and 3LPE Coating 32’’OD X 19.05, 22.23, 23.83 mm W.T.

M/S-BVIL

M/s INDRADHANUSH GAS GRID LIMITED

NORTH-EAST GAS GRID PIPELINE PROJECT (PHASE-1)

M/s Welspun Anjar

H-SAW and 3LPE Coating 24’’OD X 12.70 mm WT

M/S-BVIL

GUJARAT STATE PETRONET LIMITED

SUPPLY OF 3LPE COATED ERW LINE PIPES

M/s RATNAMANI METALS & TUBES LIMITED

HFW 6’’ OD X 6.40 & 7.90 mm W.T.

M/S-BVIL

NUMALIGARH REFINERY LIMITED

PARADIP NUMALIGARH CRUDE OIL PIPELINE PROJECT (PNCPL)

M/s. SURYA ROSHNI LTD. ANJAR

H-SAW and 3LPE Coating 26’’ OD X 9.20 mm W.T.

M/S-BVIL

DHAMRA LNG TERMINAL PVT. LTD. (DLTPL) ADANI

LNG Import, Storage & Regasification Terminal Project (RLNG Pipeline) Project

M/s Welspun Anjar

L-SAW and 3LPE Coating 36’’OD X 25.4mm W.T.

M/S-BVIL

CPC Corporation Taiwan

36” API 5L PSL1 LINE PIPE PURCHASE NO. G26081001 OF CPC CORPORATION TAIWAN

M/s. JINDAL Nanakapya-Mundra

L-SAW and 3LPE Coating, CWC 36’’ OD X 23.50, 22.40 mm W.T.

M/s BVIL

ONGC Ltd.

----

PSL Ltd.

L-SAW and 3LPE Coating & CWC Coating 36’’OD X 25.4mm W.T.

BVIL

M/S GAIL

M/S KGB Project

Welspun Corp

18’’ODX11.1mm,12.7mm,14.3mm WT HSAW and 3LPE Coating

INTERTEK INDIA PVT LTD

M/S IOCL

Ennore Thiruvallur Bengluru Puduchhery Nagapattinam Madurai Project

Welspun Corp

406.4mmODX7.92mm,14.27mm 15.88mm WT LSAW,3LPE & Internal Coating

BVIL

M/S GAIL

Dhobi Durgapur Pipeline Project

Welspun Corp

30’’ODX12.50mm,14.80mm WT HSAW and 3LPE Coating

BVIL

M/S L&T (GSPL)

Barmari Pali Pipeline Project

Essar Steel India Ltd

457mmODX 6.6mm WT,7.9mm WT,9.5mm WT & 11.7mm WT.API 5LX70 PSL-2 LSAW and 3LPE Coating.

BVIL

Ishan Equipment’s Pvt. Ltd

KPCL Refinery

Chemical injection package, Small to Medium Size Vessel and exchange, Material LTCS, CS & SS, Chemical injection package, Small to Medium Size Vessel and exchange, Material LTCS, CS & SS

BVIL

M/S L&T (GSPL)

PPPL (GSPL)

Essar Steel India Ltd

762mm OD X 15.3mm WT & 15.7mm WT,19.4mm WT.API 5LX70 PSL-2 LSAW and 3LPE Coating.

BVIL

Essar Projects Construction Ltd (GIGL)

Jalandhar Amritsar Pipeline Project

Essar Steel India Ltd

406 mm OD X 6.4mm WT & 7.5mm WT and 09mm WT & 11.2mm WT.API 5LX65 PSL-2 LSAW & 3LPE Coating

BVIL

ONGC Ltd.

PRP 04

Jindal Ltd.

L-SAW and 3LPE Coating & CWC Coating 36’’OD X 25.4mm W.T.

Toyo Engineering

MRPL/CDU VDU PROJECT

Anup Engineering

Medium Size Heat Exchangers/Chemical injection package All Stage Inspection As Material Identification In Process Inspection, Final Inspection, NDT, Welding, And Painting etc.,

Skills

Welding Inspection

LSAW Pipe Manufacturing Inspection

Structural Fabrication Quality Control

NDT Coordination (UT, RT, MT, PT, AUT)

Welding Procedure and Welder Qualification

QA/QC Management

ITP & QAP Implementation

Client & TPI Coordination

Vendor Inspection

Expediting

Documentation & Dossier Preparation

Material Certification Review (3.1/3.2)

NCR Handling & Root Cause Analysis

Coating / Painting Inspection

Quality Management Systems and Auditing

Manpower Planning and Team Leadership

Commodities

Pressure Vessels

Heat Exchangers

Dump Tanks

Storage Tanks

Piping

Structural Steel

Module Assemblies

LSAW Line Pipes

HSAW Line Pipes

ERW Line Pipes

Stainless Steel Tubes and Pipes

Induction Bends

Castings

Valves

Casing

Tubing

Couplings

Pup Joints

GRE Lines and Fittings

Chemical Injection Packages

Welding Consumables

Flux

3LPE Coating

FBE Coating

Liquid Epoxy Coating

Summary

Education

Qualifications and Training

Codes & Standards

Work Experience

Projects

Languages

Skills

Commodities